ShotPulled
Gear Home

ShotPulled › Gear › Profitec Pro 600

Profitec Pro 600 maintenance: what the manual says

Profitec’s manual lists 13 maintenance jobs for the Pro 600. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Backflush (detergent) Every 150 shots

“We recommend to carry out the brew group cleaning every 150 cups”
Backflush (water) From time to time, without cleaner

“It´s better if you clean the brew group from time to time without cleaner.”
Portafilter & basket soak Daily

“Portafilter, filters, water tank, drip tray, drip plate of the drip tray require daily cleaning.”
Boiler water change Every week

“Depending on usage, please refresh the steamboiler water every 1–2 weeks by hot water dispense.”
Drip tray empty & clean Daily

“Portafilter, filters, water tank, drip tray, drip plate of the drip tray require daily cleaning.”
Group gasket replacement When the portafilter gets stiff and no longer locks as usual, or water runs over the portafilter

“Wenn der Filterträger schwergängig wird und sich nicht mehr wie gewohnt arretieren lässt.”
Group head wipe / flush Daily

“Clean the shower screen and the group gasket in the lower part of the group and remove visible dirt without dissasembling the parts.”
Shower screen replacement When the portafilter gets stiff and no longer locks as usual, or water runs over the portafilter

“Wenn der Filterträger schwergängig wird und sich nicht mehr wie gewohnt arretieren lässt.”
Steam wand purge & wipe After every application

“Clean the steam and hot water valve after every use.”
Steam wand deep clean When the steam nozzle is blocked

“Clean the holes of the steam nozzle carefully with a needle or with a paper clip.”
Water tank clean Daily

“Portafilter, filters, water tank, drip tray, drip plate of the drip tray require daily cleaning.”

Left to a technician

Job How often The manual’s sentence
Descale A calcified machine: specialised dealer only

“A calcified machine may only be descaled by your specialised dealer because a partial disassembly of the boiler and the tubing may be necessary to prevent the system from being blocked by lime residues.”
Professional service Every 3 years

“We recommends a maintenance interval of 3-4 years.”

The settings

Coffee boiler temperature (t1)

“The temperature of the boilers are programmable and controlable independently from each other.”

Factory setting: 93 °C

“The machine is ready for coffee preparation as soon as the PID display indicates the pre-set nominal temperature of 93°C (199,4 °F factory setting).”

Steam boiler temperature (t2)

“The temperature of the boilers are programmable and controlable independently from each other.”

Factory setting: 129 °C

“The machine is ready for steam/ hot water dispension as soon as the PID display indicates the pre-set nominal temperature of 129°C (264,2 °F factory setting) or the boiler pressure gauge indicates a value of about 1.5 bars.”

Step-by-step guides

What the manual does not say

2 jobs with nothing stated
  • Shower screen clean
  • Water filter / softener replacement
Notes from the research
  • Profitec no longer serves a Pro 600 manual (profitec-espresso.com/media/pages/produkte/pro600/.../ba-pro600.pdf returns the error page); every manual-derived value is community-hosted (Clive Coffee copy of Profitec's manual).
  • Descale: first-party FAQ gives 3/6 months (preferred by the tier rule) while the Pro 600 manual gives no user procedure and reserves a calcified machine for the dealer.
  • Detergent backflush: FAQ 'every 150 cups' (preferred) vs manual 90-140.
  • No water-filter cartridge or interval; gasket/shower-screen replacement only on symptoms.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.