ShotPulled
Gear Home

ShotPulled › Gear › Lucca A53 Direct Drive

Lucca A53 Direct Drive maintenance: what the manual says

Lucca’s manual lists 10 maintenance jobs for the A53 Direct Drive and forbids 1. Each is below with how often and the sentence it comes from.

What the manual says not to do

What to do, and how often

Job How often The manual’s sentence
Backflush (detergent) Every 4 weeks

“We recommend a detergent backflushing about once every 4-6 weeks as a routine cleaning on most machines.”
Portafilter & basket soak Daily at the end of the day

“Disconnect the machine, let it cool down and then proceed with the cleaning of the filterholder (4) and of the filters, making sure not to leave any dirtiness inside the filterholder.”
Drip tray empty & clean Daily at the end of the day

“Clean the drip tray (7) and the drip tray grid (6) using, if necessary, regular detergents.”
Group gasket replacement Every year

“Remember to do this once a year.”
Group head wipe / flush Daily at the end of the day

“Clean the shower-heads below the brewing group with the brush provided with the machine.”
Shower screen clean Every 3 days

“After turning off the machine, remove the shower-heads with the provided tool, brush them carefully, making sure that all the holes are clean.”
Shower screen replacement Every year

“Remember to do this once a year.”
Steam wand purge & wipe After steaming

“Remove the pitcher from the steam wand (8) and clean immediately with a humid sponge the steam wand from possible residues of the heated drink.”
Water filter / softener replacement Per the softener maker's instructions (periodic regeneration)

“If the installation of a water softener has been recommended by the installation engineer because of hard water and problems of scale deposits, it is necessary to follow the instructions of the water softener’s manufacturer (periodic regeneration).”
Water hardness test at the group head Every few months

“No matter what solution you pick, we recommend testing the water coming from your machine’s group head every few months.”

The settings

Brew boiler target temperature

Range: 91 to 97 °C, in steps of 1.

“Tapping the hot water button in programming mode will raise the brew boiler target temperature by one degree Celsius, as reflected by the number lit on the display.”

Factory setting: not stated.

Step-by-step guides

What the manual does not say

4 jobs with nothing stated
  • Backflush (water)
  • Boiler water change
  • Professional service
  • Steam wand deep clean
Stated as not needed on this model
Job How often The manual’s sentence
Water tank clean No interval given

“Once you’ve attached the water inlet of your LUCCA A53 to a cold water line, it is time to plug in your machine.”
Notes from the research
  • 'A53 Direct Drive' is not an official name; the record is sourced as the LUCCA A53 direct-plumb (La Spaziale S1 Vivaldi II).
  • La Spaziale's S1 Vivaldi manual (s3) is the 2014 Vivaldi edition that Clive links from the A53 manual page; the A53 is Clive's rebadge of the Vivaldi II.
  • No plain-water backflush regime, steam wand deep clean, boiler water change or service interval.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.