ShotPulled › Gear › Burr clean
Clean the burrs, chamber and chute: DF64 DF83V
Before you start
- Tools
- dry brush (supplied), handheld vacuum (optional)
- Supplies
- None listed
Warnings
- The outlet holds the plasma generator's electric pin: clean it with the brush, not your fingers. Source: DF83V variable speed coffee grinder instructions (EN)
- Do not wash the grinder, inside or out, with water. Source: DF83V variable speed coffee grinder instructions (EN)
Steps
- Run the grinder and pump the bellows to clear leftover grounds from the chamber, then switch off.
From the manual: “St ep1:St ar tt hemachi neanduset hebel l owst ocl eanr esi dual cof f eegr oundsi nt hechamber”
- Unplug the grinder from the wall socket.
From the manual: “St ep2:Saf el ydi sconnectt hegr i nderf r om t hepowerout l et”
- Turn the dial anticlockwise and lift it off.
From the manual: “St ep3:Removet hedi albyt ur ni ngi tcount er cl ockwi se”
- Turn the indicating collar anticlockwise and remove it too.
From the manual: “r emovet hei ndi cat i ngcol l arbyt ur ni ngi t”
- Pull out the front burr assembly.
From the manual: “St ep5:Pul loutt hef r ontbur rcomponent”
- Clean both burrs and the chamber with a dry brush or a handheld vacuum.
From the manual: “St ep6:Ut i l i zeadr ybr ushorhandhel dvacuum t ocl eanbot h t hebur r sandt hechamber”
- Pull off the magnetic chute and brush it thoroughly with a dry brush.
From the manual: “St ep7:Removet hemagnet i cchut eandcl eani tt hor oughl y wi t hadr ybr ush”
- Brush the powder outlet with a dry brush, keeping your fingers out of it.
From the manual: “St ep8:Cl eant hepowderout l etwi t hadr ybr ush”
- Reassemble everything in the reverse order.
From the manual: “St ep9:Reassembl eal lt hepar t si nt her ever seor der .”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.