ShotPulled
Gear Home

ShotPulled › Gear › DF64 DF83V

MiiCoffee / Turin / DF64 DF83V cleaning and settings: what the manual says

DF64’s manual lists 3 maintenance jobs for the DF83V. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Burr clean No interval given

“St ep6:Ut i l i zeadr ybr ushorhandhel dvacuum t ocl eanbot h t hebur r sandt hechamber ;”
Quick clean After every grind

“St ep5:Af t ergr i ndi ng,pr esst hebel l owsagai nt obl ow outany r emai ni ngcof f eegr ounds( Nor malwor ki ngdur at i onshoul dnot exceed45seconds) ;”
Exit chute brush-out No interval given

“St ep7:Removet hemagnet i cchut eandcl eani tt hor oughl y wi t hadr ybr ush;”

The collar

Adjustment
Stepless
Finer is
Not recorded for this model
How a setting reads
A number on the dial; lower is finer
What one step is worth
The maker publishes no figure

Step-by-step guides

What the manual does not say

6 jobs with nothing stated
  • Bearing / thread lubrication
  • Burr replacement
  • Seal / gasket replacement
  • Cleaning tablets
  • Grounds cup / catch clean
  • Hopper clean
Notes from the research
  • The maker gives a cleaning procedure but no interval.
  • Burr sets are warranty-excluded consumables, but no life in kg is given.
  • Nothing on cleaning tablets, thread grease, hopper, dosing cup or seals; the Turin/Espresso Outlet community guide covers the DF83 Gen 2, not the DF83V, so it was not applied.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.