ShotPulled
Gear Home

ShotPulled › Gear › Flair 58

Flair 58 maintenance: what the manual says

Flair’s manual lists 7 maintenance jobs for the 58 and forbids 1. Each is below with how often and the sentence it comes from.

What the manual says not to do

What to do, and how often

Job How often The manual’s sentence
Portafilter & basket soak After use

“To clean your portafilter: Knock out the puck after use and rinse under the faucet until clean.”
Group head wipe / flush As needed or as desired (help-center article)

“Use damp cloth to wipe the inside and bottom of the brew head.”
Lever/piston lubrication After rinsing the plunger

“Afterwards, it is good practice to lightly lubricate the o-rings to re-encourage smooth travel, as you will have rinsed away the natural coffee oils that built-up.”
Piston seal replacement Wear part, no interval given

“All other parts of the Flair 58 and Flair 58x that are more subject to normal wear and tear, including but not limited to O-rings and Silicone Sleeves, are warranted against defects in material, design or workmanship for six (6) months from the purchase date”
Shower screen clean After use

“To clean your puck screen: Simply rinse with high-pressure using your sink sprayer after use.”
Press stand wipe-down After use

“To clean your press stand: Simply wipe down with a clean cloth after use.”
Pressure gauge o-ring replacement When the gauge leaks and the o-ring shows nicks or tears

“If you see any nicks or tears, the o-ring will need to be replaced.”

The settings

Preheat Control System

  • Low: ~85° C (185° F)
  • Medium: ~90° C (194° F)
  • High: ~95° C (203° F)

“The Flair 58’s Preheat Control System can preheat the brewing cylinder to three different temperatures: Low, Medium or High, which can be used for different roast and extraction levels.”

Factory setting: not stated.

Step-by-step guides

What the manual does not say

7 jobs with nothing stated
  • Backflush (detergent)
  • Backflush (water)
  • Descale
  • Drip tray empty & clean
  • Group gasket replacement
  • Professional service
  • Shower screen replacement
Notes from the research
  • No descale, backflush or professional-service guidance: nothing in the design needs them, but Flair never says so explicitly.
  • Plunger o-ring replacement has no interval; Flair only classes o-rings as wear parts.
  • No drip tray or shower screen replacement guidance.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.