ShotPulled
Gear Home

ShotPulled › Gear › Fiorenzato AllGround Sense

Fiorenzato AllGround Sense cleaning and settings: what the manual says

Fiorenzato’s manual lists 6 maintenance jobs for the AllGround Sense. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Burr clean After each use

“Using a soft bristle brush (clean and sanitised), with a dry cloth and a vacuum cleaner, clean the removable chamber (Item 1) and the fixed grinder attached to it (Item 2) carefully removing any residual coffee powder from all the surfaces and teeth of the grinder.”
Cleaning tablets Every 6 months

“The grinders must be thoroughly cleaned at least every 6 months (or sooner if deemed necessary), using products specifically designed to clean grinders, which are easily available on the market (e.g. PULY GRIND detergent for coffee grinders).”
Quick clean After each use

“Wash the dispensing tube with hot water and a non-perfumed detergent and degreaser with a neutral pH specific for the food sector.”
Hopper clean After each use

“Clean the internal and external surfaces of the hopper using hot water and a neutral PH non-perfumed detergent and degreaser suitable for the food sector.”
Weighing system calibration Whenever necessary

“If, over time, a gradual decline in the performance of the instant weighing system is observed, resulting in out-of-tolerance dosing (due, for example, to the stiffening of the load cell support grommets), it is advisable to recalibrate the weighing system before contacting the support service.”

Left to a technician

Job How often The manual’s sentence
Burr replacement Only if damaged

“If, however, the grinders are damaged (e.g. if the removable chamber is accidentally dropped on the floor and/or if any hard foreign objects have been accidentally placed in the grinding chamber), they must only be replaced by a trusted specialist repair service.”

The collar

Adjustment
Stepped, with numbered positions
Finer is
Counter-clockwise, looking down at top ring nut
How a setting reads
A number on the dial; lower is finer
What one step is worth
10 µm

Step-by-step guides

What the manual does not say

3 jobs with nothing stated
  • Bearing / thread lubrication
  • Seal / gasket replacement
  • Grounds cup / catch clean
Notes from the research
  • Burrs are rated for the machine's life: no burr-replacement interval.
  • No lubrication or seal guidance.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.