ShotPulled
Gear Home

ShotPulled › Gear › Fellow Ode Gen 1

Fellow Ode Gen 1 cleaning and settings: what the manual says

Fellow’s published guidance lists 4 maintenance jobs for the Ode Gen 1. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Burr clean Every 3 months

“If the grinder is used daily, the burrs should be cleaned at least every three months using tablets (see below for Automatic Cleaning) or with a stiff brush.”
Cleaning tablets Every 3 months

“If the grinder is used daily, the burrs should be cleaned at least every three months using tablets (see below for Automatic Cleaning) or with a stiff brush.”
Grounds cup / catch clean No interval given

“To wash the catch, wipe gently with a soft cloth and warm soapy water.”
Hopper clean No interval given

“Wipe grinder exterior and load bin with a soft, damp cloth.”

The collar

Adjustment
Stepless
Finer is
Counter-clockwise, viewed square-on from the front dial
How a setting reads
A number on the dial; lower is finer
What one step is worth
The maker publishes no figure

Step-by-step guides

What the manual does not say

4 jobs with nothing stated
  • Bearing / thread lubrication
  • Burr replacement
  • Seal / gasket replacement
  • Quick clean
Notes from the research
  • Only copy of the Gen 1 manual found is on williams-sonoma.com (retailer); Fellow's help-centre copy (help.fellowproducts.com) returns 403 to scripted fetches. All values are therefore basis community though the text is Fellow's.
  • No burr life, quick-clean interval, lubrication or seal guidance.
  • 'Any other servicing should be performed by an authorized service representative.' Opening the base voids the warranty.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.