ShotPulled
Gear Home

ShotPulled › Gear › Comandante C40 MK3

Comandante C40 MK3 cleaning and settings: what the manual says

Comandante’s published guidance lists 4 maintenance jobs for the C40 MK3 and forbids 1. Each is below with how often and the sentence it comes from.

What the manual says not to do

What to do, and how often

Job How often The manual’s sentence
Burr clean Every week

“Once a week (heavy use) or month (light use) is more than enough.”
Grounds cup / catch clean A clean jar each time

“We recommend simply using a clean bean jar each time to keep your dose of ground coffee as fresh as possible.”
Lubricate crank/knob joint (when squeaking) When the knob squeaks

“Simply remove the knob from the crank, then lubricate the crank or the inside of the oak knob.”
Wood veneer care (beeswax polish) No interval given

“You can care for the wood with a good, natural beeswax polish, like the one in our Wood Care Balm Set.”

The collar

Adjustment
Stepped, counted in clicks
Finer is
Clockwise, looking directly at bottom/underside clicker
How a setting reads
A count of clicks, starting at 0; lower is finer
What one click is worth
The maker publishes no figure

Step-by-step guides

What the manual does not say

6 jobs with nothing stated
  • Bearing / thread lubrication
  • Burr replacement
  • Seal / gasket replacement
  • Cleaning tablets
  • Quick clean
  • Hopper clean
Notes from the research
  • No C40 MK3-specific manual found; all values come from Comandante's C40 FAQ, which does not name the mark.
  • No burr replacement interval (maker claims lifetime burrs), no cleaning-tablet guidance, no seal replacement.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.