ShotPulled
Gear Home

ShotPulled › Gear › Ascaso Steel UNO PID

Ascaso Steel UNO PID maintenance: what the manual says

Ascaso’s manual lists 13 maintenance jobs for the Steel UNO PID. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Backflush (detergent) Every week

“For home use (2-3 coffees daily), backflush this espresso machine once weekly.”
Backflush (water) Every week

“Internal cleaning (back flushing) - blind filter. Weekly. Except pod models (fixed filter holder).”
Portafilter & basket soak No interval given; hot water and pH-neutral soap

“Mobile filter holder: Wash the filter holder with hot water and pH neutral soap.”
Descale Every month

“Coffees/day Descaling >10 monthly 5-10 every 2 months 1-5 every 3 months”
Drip tray empty & clean From time to time

“Remove and clean the tray from time to time (figure 8).”
Group gasket replacement Every 6 months

“For preventative maintenance, replace group screen and group gasket EVERY 6 months.”
Group head wipe / flush Every week

“Additional weekly cleaning steps include removing and cleaning the steam tip, as well as using a grouphead cleaning brush or cloth to wipe oils/grinds off the group screen and group head gasket.”
Shower screen clean Every 80 shots

“The top shower head should be cleaned after 80 to 100 espresso coffees.”
Shower screen replacement Every 6 months

“For preventative maintenance, replace group screen and group gasket EVERY 6 months.”
Steam wand purge & wipe Immediately after use

“Immediately after use, clean the steam nozzle with a damp cloth.”
Steam wand deep clean No interval given; clear the frother hole with a toothpick or paper clip

“Use a toothpick or paper clip to clean the frother hole.”
Water tank clean No interval given

“Remove the tank from the side of the machine.”
Steam valve rebuild Every year

“Steam valve components may need to be rebuilt annually.”

The settings

Coffee temperature

“Coffee temperature, shown on screen. To change it, press the button 25 , the screen will display the message PrG, indicating that it is in temperature programming mode.”

Factory setting: not stated.

Pre-infusion (Pr)

Range: 0 to 5 s, in steps of 1.

“Pre-infusion, selecting the pump activation and stop time between 0 and 5 seconds.”

Factory setting: not stated.

Step-by-step guides

What the manual does not say

2 jobs with nothing stated
  • Professional service
  • Water filter / softener replacement
Notes from the research
  • Detergent backflush frequency, group gasket and screen replacement come from the AscasoUSA/Espresso Parts FAQ (distributor), not the Ascaso manual.
  • Descale interval is a consumption table (not hardness); water filter cartridge and service interval not stated.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.