ShotPulled › Gear › Shower screen replacement
Replace the shower head and group gasket: Vibiemme Domobar Super 2B
Before you start
- Tools
- screwdriver, filter holder
- Supplies
- shower head (group screen); group gasket
Warnings
- Do this with the machine switched off, cold and unplugged. Source: VBM Domobar Super Digital-Electronic instruction manual (MANSUPDG, 07-2020, 5 languages), Wayback copy of 1st-line upload
Steps
- Pry the shower head out of the group with a screwdriver; the gasket comes out with it.
From the manual: “Use a screwdriver to pry the shower head (1) and remove it from the group (2) with the gasket.”
- Swap in a new shower head and a new gasket.
From the manual: “Replace the shower head (1) and the gasket (3).”
- Fit the gasket onto the shower head with its notch "A" facing up.
From the manual: “making sure that the notch “A” seal is positioned upward.”
- Sit the shower head and gasket on the filter holder.
From the manual: “Place the shower head on the holder.”
- Engage the filter holder in the group by the left lug first, turned all the way, then the right.
From the manual: “first on the left flap switching it to the end, then on the right flap”
- Lock the filter holder in as if making coffee, which presses the shower head and gasket into place.
From the manual: “bring it to switch to lock in place the hand shower with the gasket”
Sources
Researched on .
Community: the maker’s text, hosted somewhere else, usually by a retailer.