ShotPulled › Gear › Water filter / softener replacement
Replace the water filter: Slayer Single Group
Before you start
- Tools
- drain or bucket for the flush
- Supplies
- carbon filter cartridge (mandatory on every Slayer; plus ion exchange (6-9 grains) or remineralised RO (mandatory above 9 grains) as the water needs)
Warnings
- Skipping the flush of a new filter will damage the machine. Source: Slayer Espresso Single Group user manual V7.1 (August 2022)
- Damage from poorly treated water is not covered by the warranty. Source: Slayer Espresso Single Group user manual V7.1 (August 2022)
Steps
- Once a filtration method is chosen, note the filter's rated peak capacity.
From the manual: “Once a filtration method has been selected, take note of the filter's peak capabilities.”
- Ask the filtration provider or vendor how long the filters last, and schedule replacements from that.
From the manual: “Contact the filtration provider or vendor to inquire about the life expectancy of the filters”
- Rinse each new filter thoroughly before connecting it to the machine or pump.
From the manual: “thoroughly rinse the filter before attaching it to your machine or pump.”
- Run supply water through the new filter and down a drain for at least 2 minutes before connecting.
From the manual: “Run water from the supply line through the filter and down a drain for at least 2 minutes”
- Retest the water each season, since filtration needs can change. Optional
From the manual: “Water should be tested during each season to determine the best filtration plan.”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.