ShotPulled › Gear › Group gasket replacement
Replace the group gasket: Sanremo YOU
Before you start
- Tools
- screwdriver, sponge, filter holder
- Supplies
- replacement group gasket (original Sanremo spare part; size not stated)
Warnings
- Coffee spilling over the edges of the filter holder can mean the group gasket is worn and needs replacing. Source: Sanremo YOU instruction booklet 81013001, IT-EN-FR-DE-ES
- For a leak between group and filter holder while brewing, the maker points to a defective cup gasket or filter edge and the technical service. Source: Sanremo YOU instruction booklet 81013001, IT-EN-FR-DE-ES
- Fit only original Sanremo spare parts. Source: Sanremo YOU instruction booklet 81013001, IT-EN-FR-DE-ES
Steps
- Switch the machine off with the main switch at 0 and let it cool.
From the manual: “Maintenance operations must be performed with the machine off and cold and with the main switch set to “0” OFF.”
- Unscrew and remove the shower screen (the manual's 'group spout') and the gasket with a screwdriver.
From the manual: “Using a screwdriver, remove the group spout and the gasket.”
- Clean the underside of the group with a sponge.
From the manual: “clean the lower part of the group with a sponge”
- Fit the new gasket with the cleaned shower screen, pushing them into place with a filter holder.
From the manual: “Clean them and mount them again using a filter holder;”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.