ShotPulled › Gear › Burr clean
Brush the burrs: Sage Smart Grinder Pro
Before you start
- Tools
- cleaning brush (supplied), airtight container for the beans
- Supplies
- None listed
Warnings
- No alkaline or abrasive cleaners, steel wool or scouring pads. Source: Sage the Smart Grinder Pro SCG820 instruction book (UK, 2021)
- Keep water away from the grinder base, cord and plug. Source: Sage the Smart Grinder Pro SCG820 instruction book (UK, 2021)
Steps
- Unlock the bean hopper.
From the manual: “Unlock hopper Hold hopper over container”
- Hold the hopper over an airtight container and turn its dial to let the beans run out.
From the manual: “Hold hopper over container & turn dial to release beans into container”
- Set the hopper back in position.
From the manual: “Align hopper into position Run grinder until empty”
- Run the grinder until nothing more comes out.
From the manual: “Run grinder until empty Remove hopper Remove upper burr”
- Unplug the grinder before cleaning.
From the manual: “Unplug power cord from power outlet before cleaning.”
- Take the hopper off, then lift out the upper burr.
From the manual: “Remove hopper Remove upper burr”
- Brush the upper burr with the cleaning brush.
From the manual: “Clean upper burr with cleaning brush”
- Brush the lower burr in the grinder.
From the manual: “Clean lower burr with cleaning brush”
- Brush out the grind outlet.
From the manual: “Clean grind outlet with brush”
- Push the upper burr firmly back into place and lock it.
From the manual: “Push upper burr firmly into position Lock upper burr”
- Set the hopper in position and lock it.
From the manual: “Align hopper into position Lock hopper”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.