ShotPulled › Gear › Built-in grinder burr clean
Brush the grinder burrs: Sage Barista Touch Impress
Before you start
- Tools
- cleaning brush (supplied)
- Supplies
- None listed
Warnings
- The burrs are very sharp; handle them carefully. Source: Sage the Barista Touch Impress BES881/SES881 user guide (EU Nordic, multilingual; EN section)
Steps
- Unlock the bean hopper and empty the beans out of it.
From the manual: “Unlock hopper Empty hopper”
- Put the empty hopper back and lock it.
From the manual: “Replace hopper Lock hopper Run grinder until empty”
- Run the grinder until no coffee comes out.
From the manual: “Run grinder until empty”
- Unlock the hopper and lift it off.
From the manual: “Unlock hopper Remove hopper”
- Unlock the top burr and lift it out.
From the manual: “Unlock top burr Remove top burr”
- Brush the top burr clean.
From the manual: “Clean top burr with brush”
- Brush the lower burr in the machine.
From the manual: “Clean lower burr with brush”
- Take off the tamp cover.
From the manual: “Remove tamp cover”
- Brush out the grind chute.
From the manual: “Clean the chute with brush”
- Put the tamp cover back.
From the manual: “Replace tamp cover”
- Refit the top burr and lock it.
From the manual: “Insert & lock top burr”
- Refit the hopper and lock it.
From the manual: “Replace hopper Lock hopper”
Sources
- Sage the Barista Touch Impress BES881/SES881 user guide (EU Nordic, multilingual; EN section) Manual
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.