ShotPulled › Gear › Built-in grinder burr clean
Clear a blocked grinder (advanced clean): Sage Barista Pro
Before you start
- Tools
- 10 mm socket, long-nose pliers, cleaning brush (supplied) or a pipe cleaner
- Supplies
- None listed
Warnings
- The burrs are very sharp; handle them carefully. Source: Sage the Barista Pro BES878/SES878 quick guide (UK, EN)
Steps
- Only do this if grounds are blocked between the burrs and the outlet. Start by removing the hopper.
From the manual: “This step is only required if there is a blockage between the grinding burrs and the grinder outlet.”
- Set GRIND SIZE to 1, the finest setting.
From the manual: “Set GRIND SIZE to 1 (finest)”
- With a 10 mm socket, turn the burr nut clockwise just to loosen it; do not remove it yet.
From the manual: “Use 10mm socket.”
- Set GRIND SIZE to 30, the coarsest setting.
From the manual: “to 30 (coarsest)”
- Unlock the top burr and take it out.
From the manual: “Unlock & remove top burr”
- Take off the nut, spring washer and flat washer, then carefully lift out the lower burr.
From the manual: “remove lower burr”
- Pull out the grind fan and its washers with long-nose pliers.
From the manual: “Remove grind fan”
- Clear the grinds exit chute with the brush or a pipe cleaner.
From the manual: “exit chute using the brush or a pipe cleaner”
- Brush the chute clean.
From the manual: “Clean chute with brush”
- Refit with the pliers in this order: felt washer, metal washer, grind fan.
From the manual: “Insert washers & grind fan using long-nose pliers”
- Refit the lower burr with its drive pin in the cavity, then the flat and spring washers.
From the manual: “Insert lower burr (drive pin & cavity to align). Insert flat washer & spring washer”
- Tighten the nut by turning it anticlockwise.
From the manual: “Rotate counterclockwise to tighten nut”
- Refit the top burr and lock it.
From the manual: “Insert & lock top burr”
- Set GRIND SIZE to 15, then refit and lock the hopper.
From the manual: “Set GRIND SIZE to 15. Replace & lock hopper”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.