ShotPulled › Gear › Water filter / softener replacement
Replace the water filter: Sage Bambino
Before you start
- Market
- Sage UK/EU
- Tools
- water filter holder (supplied)
- Supplies
- replacement water filter (fits the supplied filter holder; the manual does not name the cartridge)
Warnings
- Never use a damaged cartridge, and do not open one. Source: Sage the Bambino BES450/SES450 quick guide (UK, EN)
- Store spare cartridges dry in their original packaging, out of heat and direct sun. Source: Sage the Bambino BES450/SES450 quick guide (UK, EN)
- Before a long absence, empty the tank; fit a new cartridge when you return. Source: Sage the Bambino BES450/SES450 quick guide (UK, EN)
Steps
- Take the new filter and the filter holder out of the packaging.
From the manual: “Remove the water filter and water filter holder from the packaging.”
- Set the holder's reminder dial to the month of the next change, 3 months ahead.
From the manual: “Set the reminder for the next month of replacement. We recommend to replace the filter after 3 months.”
- Soak the new filter in cold water for 5 minutes.
From the manual: “Soak the filter in cold water for 5 minutes.”
- Rinse the filter holder under cold water.
From the manual: “Wash the filter holder with cold water.”
- Fit the filter between the two halves of the holder and check they are joined.
From the manual: “Insert the filter into the two parts of the filter holder. Ensure they are connected.”
- Lift off the water tank, line the holder base up with the adapter inside, and push down to lock.
From the manual: “Align the base of the filter holder with the adapter inside the water tank. Push down to lock into place.”
- Fill the tank with potable water to MAX and seat it back flush against the machine.
From the manual: “add potable water to the water tank, filling to the MAX marking indicated.”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.