ShotPulled
Gear Home

ShotPulled › Gear › Water filter / softener replacement

Change the water filter cartridge: Profitec GO

Before you start

Tools
None listed
Supplies
water filter cartridge (Profitec accessory AC100027-00 ("Make Coffee Yours" filter))

Warnings

The machine tells you when

This machine keeps count itself and tells you when this job is due, so follow the machine rather than a calendar.

What you see
"Waterfilter Reminder" icon on the display
Shown as
A message on the display
What it counts
Litres of water
Depends on
Filter Reminder menu (an Advanced User Setting): cartridge setting A/B/C or 5-200 L in 5 L steps; OFF by default
How it clears
not automatically: reset it in the Reset Reminder menu after the change ("---" confirms)
Can be switched off
Yes

Source: Profitec GO user manual DE/EN/FR (GO 2.0_BA_V2.0, item CM500014)

Steps

  1. Unpack the new cartridge and prepare it as its own filter instructions say.

    From the manual: “Unpack and prepare the filter cartridge according to the water filter instructions.”

  2. Lift the water tank lid off the top of the machine.

    From the manual: “Remove the water tank lid from the top of the machine.”

  3. Push the cartridge into the filter adapter in the tank until it latches.

    From the manual: “Insert the filter cartridge into the water filter adapter (1, Fig. 4) in the water tank until it latches in place.”

  4. Put the tank lid back on.

    From the manual: “Install the water tank lid.”

  5. If the Filter Reminder menu is hidden, show it: main menu, "Advanced User Settings", select ON. Only when: the first time you use the filter reminder

    From the manual: “Select and open the “Advanced User Settings” submenu.”

  6. In "Filter Reminder", set the letter (A, B or C) printed under the cartridge, or a volume in 5-litre steps up to 200 L.

    From the manual: “the selected setting (A, B, C) on the bottom of the filter cartridge”

  7. After each change, reset it: main menu, "Reset Reminder", "Filter Reminder", confirm with the top brew button until "---" shows.

    From the manual: “After cleaning the brew group or changing the water filter, these reminder functions must be reset as follows”

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to