ShotPulled
Gear Home

ShotPulled › Gear › Descale

Run the guided descaling process: Profitec GO

Before you start

Tools
container of at least 500 ml that fits under the brew group, blind filter (supplied)
Supplies
Profitec descaler (original Profitec descaler only); fresh water

Warnings

Steps

  1. Have ready a container of at least 500 ml that fits under the group, the blind filter, Profitec descaler and fresh water.

    From the manual: “Receptacle with a volume of at least 500 ml that fits under the brew group”

  2. Open the main menu by holding the left and right display buttons for 3 seconds.

    From the manual: “Press and hold the left-hand and right-hand display button for 3 seconds.”

  3. Select and open the "Descaling Process" submenu.

    From the manual: “Select and open the “Descaling Process” submenu.”

  4. Choose START and confirm it.

    From the manual: “Select “START” and confirm.”

  5. Work through the prompts on the display without skipping or changing any step.

    From the manual: “Follow the step-by-step explanation on the machine display and do not deviate from the proper procedure”

  6. If "too HOT" appears, either wait for the machine to cool or confirm the message to cool it now. Only when: if the display shows "too HOT"

    From the manual: “If the machine is too hot for descaling, the message “too HOT” appears on the display”

  7. Set a receptacle of more than 500 ml under the group and confirm. Only when: if the display shows "too HOT"

    From the manual: “Place a suitable receptacle under the brew group and confirm the message.”

  8. Press the lit brew button to draw water; "COOLING" shows, then carry on with the display prompts. Only when: if the display shows "too HOT"

    From the manual: “The drawing process is started and the message “COOLING” appears on the display.”

  9. If the process was interrupted, rinse the machine thoroughly as in initial start-up. Only when: if descaling was interrupted

    From the manual: “If the process is interrupted, a thorough rinsing process may be required”

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to