ShotPulled
Gear Home

ShotPulled › Gear › Backflush (detergent)

Run the automatic brew-group clean: Profitec GO

Before you start

Time
About 2.25 minutes (automatic cycle only (135-second countdown); brushing and post-rinse are extra)
Tools
blind filter (supplied), cleaning brush (supplied), portafilter
Supplies
powder cleaner for degreasing the brew group (3-5 g per clean, from a specialist retailer)

Warnings

The machine tells you when

This machine keeps count itself and tells you when this job is due, so follow the machine rather than a calendar.

What you see
Cleaning Reminder icon on the display
Shown as
A message on the display
What it counts
Shots
Depends on
Cleaning Reminder menu: 10-200 shots in steps of 10, OFF by default. Only brews over 15 s count.
How it clears
not automatically: reset it in the Reset Reminder menu after cleaning ("---" confirms)
Can be switched off
Yes

Source: Profitec GO user manual DE/EN/FR (GO 2.0_BA_V2.0, item CM500014)

Steps

  1. Brush the brew group gasket and the shower screen with the supplied brush.

    From the manual: “Clean the brew group gasket and shower screen using the brush provided.”

  2. Take the cup filter out of the portafilter.

    From the manual: “Remove the cup filter from the portafilter”

  3. Fit the blind filter in the portafilter instead.

    From the manual: “Insert the blind filter in the portafilter”

  4. Put 3-5 g of cleaning powder into the blind filter.

    From the manual: “Fill the blind filter with 3 - 5 g of the cleaning powder.”

  5. Lock the portafilter, with blind filter and powder, into the brew group.

    From the manual: “Insert the portafilter including the blind filter and cleaning powder in the brew group”

  6. Start the clean: hold both brew buttons for 5 seconds; a countdown appears after 2 seconds, then let go.

    From the manual: “Press and hold both brew buttons for 5 seconds during operation.”

  7. Or start it from the menu: open the main menu, choose "Automated Cleaning" and confirm "Start". Optional

    From the manual: “Select and open the “Automated Cleaning” submenu.”

  8. Let the 135-second countdown run; the dissolved oils drain from the group's residual-water outlet.

    From the manual: “The counter starts at 135 seconds and the blind filter fills with water.”

  9. If the Cleaning Reminder icon is still shown, reset it now. Only when: if the Cleaning Reminder icon is on the display

    From the manual: “If the icon for the reminder function “Cleaning Reminder” appears on the display, reset it”

  10. To reset: hold the left and right display buttons 3 seconds to open the main menu. Only when: if the Cleaning Reminder icon is on the display

    From the manual: “Press and hold the left-hand and right-hand display button for 3 seconds.”

  11. Open "Reset Reminder", pick "Cleaning Reminder" and confirm with the top brew button until "---" shows. Only when: if the Cleaning Reminder icon is on the display

    From the manual: “If “---” appears on the display, the selected reminder setting has been successfully reset.”

  12. When the countdown ends, take the portafilter out and rinse it with fresh water.

    From the manual: “remove the portafilter from the brew group and rinse out with fresh water”

  13. Lock it back in and briefly press a brew button.

    From the manual: “Briefly press one of the brew buttons to start the brewing process.”

  14. Wait for the pump pressure gauge to reach 9 bar.

    From the manual: “Wait until the pressure has built up and 9 bar is displayed on the pump pressure gauge.”

  15. Press the flashing brew button again to release the pressure and water through the outlet.

    From the manual: “Press the flashing brew button again.”

  16. Repeat the press, build to 9 bar, release cycle until only clear water runs into the drip tray. Repeat until clear water runs into the drip tray

    From the manual: “until clear water comes out into the drip tray”

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to