Flush the froth tube after milk drinks: Mr. Coffee Cafe One-Touch

Before you start

Tools

large empty mug of at least 325 ml / 11 oz

Supplies

None listed

Steps

1. Check the milk reservoir and its lid are properly seated on the unit.

   From the manual: “Ensure the milk reservoir and lid are properly inserted in the unit.”

2. Put a large empty mug (at least 325 ml / 11 oz) under the froth dispensing tube.

   From the manual: “Place a large empty mug under the froth dispensing tube.”

3. Turn the Froth Control Knob anticlockwise to the clean position and press Clean.

   From the manual: “Turn the Froth Control Knob counter clockwise to the clean position”

4. Let it run until the water from the tube is clear, or until it stops by itself; Clean stops it early.

   From the manual: “Let the unit dispense the water through the tube until it comes out clear.”

5. Empty the mug.

   From the manual: “Dispose of the water in the mug.”

6. If there is milk left, lift off the reservoir with its lid and keep it in the fridge. Optional

   From the manual: “You can remove the milk reservoir with the lid and store it in the fridge for later use.”

Sources

• Mr. Coffee One-Touch CoffeeHouse BVMC-EM6701 series instruction manual (EN/ES, 2022) Manual

Researched on 2026-09-23.

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to

• Mr. Coffee Cafe One-Touch