ShotPulled › Gear › Cleaning tablets
Clean the grinding mechanism with GRINDZ: Mahlkönig X54 Allround Home
Before you start
- Tools
- container module, bowl
- Supplies
- GRINDZ grinder cleaner (maker-recommended; quantity per the cleaner's own instructions); coffee beans for flushing (same amount as the cleaner, discarded)
Warnings
- Never blow the grinder out with compressed air. Source: Mahlkönig X54 Allround Home Grinder original instruction manual (EN)
- Never immerse the grinder, its cable or plug in water or any liquid. Source: Mahlkönig X54 Allround Home Grinder original instruction manual (EN)
- Do not open the casing; repairs are for a specialist workshop. Source: Mahlkönig X54 Allround Home Grinder original instruction manual (EN)
Steps
- Set the grind to a medium setting.
From the manual: “Set the grinding degree to a medium setting”
- Lift off the bean hopper, beans and all, and tip the beans into another container for now.
From the manual: “Remove the bean hopper (1) with any espresso/ coffee beans which it may still contain”
- Fit the container module in the module area.
From the manual: “Insert the container module (21) in the module area (11)”
- Pour the grinder cleaner straight into the grinding mechanism from above, in the amount its maker specifies.
From the manual: “Pour the grinder cleaner into the grinding mechanism directly from above.”
- Brush any spilled cleaner out of the bean hopper intake.
From the manual: “Remove any excess grinder cleaner from the bean hopper intake (4).”
- Refit the hopper with its sliding valve closed (position 2).
From the manual: “keep it closed to the grinding mechanism (sliding valve (3) in position 2)”
- Put a bowl under the spout to catch the ground cleaner.
From the manual: “Place a bowl in the module area under the spout (13) to collect the grinder cleaner.”
- Switch to Manual Grinding mode if needed and press START/STOP to grind.
From the manual: “switch to the Manual Grinding mode and then press the START/STOP button (28) to start grinding.”
- Let the full grinding time run (90 seconds maximum) and repeat until all the cleaner is ground. Repeat until all the cleaner has been ground
From the manual: “repeat the process several times if necessary until the grinder cleaner has been ground completely.”
- Push the sliding valve fully in to open the hopper to the burrs (position 3).
From the manual: “Now push the sliding valve all the way in.”
- Grind the same weight of beans as cleaner to flush out the particles, setting your usual grind while it runs.
From the manual: “Grind the same amount of espresso/coffee beans as you did grinder cleaner”
- Throw the ground cleaner and the flushing coffee away with household waste.
From the manual: “Dispose of the ground grinder cleaner and the ground espresso/coffee beans”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.