ShotPulled
Gear Home

ShotPulled › Gear › Backflush (detergent)

Backflush the group with detergent: Lelit Mara X

Before you start

Tools
blind filter (supplied), portafilter, damp cloth
Supplies
espresso machine detergent powder (1 single-dose bag per backflush; first bags in the equipment box, then Lelit PLA9201)

Warnings

Steps

  1. Fit the blind filter in the portafilter and empty one sachet of detergent powder into it.

    From the manual: “Insert the blind filter (C) into the portafilter and pour 1 bag of detergent powder (F or PLA9201) into the filter.”

  2. Lock the portafilter into the group and raise the lever, holding it up for 10 seconds.

    From the manual: “Insert the portafilter (G) in the group (13) and lift the lever (14) for 10 seconds.”

  3. Bring the lever fully down to stop, then pause for 10 seconds.

    From the manual: “Stop the function by lowering the lever completely and wait for 10 seconds.”

  4. Run that 10-seconds-up, 10-seconds-down cycle 10 times in all. Repeat 10

    From the manual: “Repeat the procedure 10 times”

  5. Take the portafilter out and rinse it under hot water run from the group.

    From the manual: “Remove the portafilter (G) from the group and rinse it with hot water from the brewing group”

  6. Lock it back in and do 5 more 10-second cycles without detergent. Repeat 5

    From the manual: “repeat the previous operation 5 times for 10 seconds each time, without detergent powder.”

  7. Remove the portafilter and lift the blind filter out.

    From the manual: “Remove the portafilter (G) and take out the blind filter (C).”

  8. Empty the drip tray, then rinse the tray, portafilter and baskets well under the tap.

    From the manual: “Empty the drainage tray (17) and rinse the portafilter (G), the filters and the tray (17) with plenty of tap water.”

Sources

Researched on .

Community: the maker’s text, hosted somewhere else, usually by a retailer.

Applies to