Fit the resin water filter: Lelit Anna PID

Before you start

Tools

None listed

Supplies

LELIT resin water filter (LEMC747 (12 fillings) or LEMC747 Plus (24 fillings))

Warnings

• Fit the filter on the intake, never on the tank's discharge pipe. Source: LELIT PL41 TEM, instructions for an optimal use (Les Importations Edika, Lelit's Canadian importer), retailer copy via the Wayback Machine

Steps

1. Take the small sand strainer off the intake inside the water tank and fit the LELIT resin filter in its place.

   From the manual: “Install the filter inside the water tank (19) instead of the small sand filter provided with the machine.”

2. Change it after 12 tank fillings for the LEMC747, or 24 for the LEMC747 Plus.

   From the manual: “It is important to change this filter every 12 fillings of your water tank for the LEMC747”

Sources

• LELIT PL41 TEM, instructions for an optimal use (Les Importations Edika, Lelit's Canadian importer), retailer copy via the Wayback Machine Service guide

Researched on 2026-09-23.

Community: the maker’s text, hosted somewhere else, usually by a retailer.

Applies to

• Lelit Anna PID