ShotPulled › Gear › Burr clean
Clean the burrs and grinding chamber: Eureka Atom 75
Before you start
- Tools
- Allen key, screwdriver, vacuum cleaner, brush
- Supplies
- None listed
Warnings
- Never clean the grinder with water jets or detergents. Source: Eureka Atom range user handbook (Atom 60 / Atom Specialty 65 / Atom Specialty 75)
- Eureka reserves maintenance, burr replacement included, for skilled personnel it has authorised. Source: Eureka Atom range user handbook (Atom 60 / Atom Specialty 65 / Atom Specialty 75)
Steps
- Close the hopper tab and grind out the beans still sitting above the burrs.
From the manual: “Close the hopper tab”
- Switch off and unplug the grinder before opening anything.
From the manual: “Unplug the appliance before performing any cleaning and maintenance operation.”
- Undo the hopper's locking screw at the back of the grinder and lift the hopper off.
From the manual: “lines up with the screw (9) on the back part of the appliance”
- Undo the screws on the top cover and take the cover off.
From the manual: “Unscrew ,the cover”
- Vacuum the grinding chamber for a first pass.
From the manual: “First cleaning of the grinding chamber”
- Unscrew the upper burr holder and lift it out.
From the manual: “Unscrew the upper burr holder”
- Brush the upper burr, then vacuum the loosened dust off it.
From the manual: “First cleaning Draw dust out”
- Undo its screws and take the upper burr off the holder.
From the manual: “Take the upper burr out from the upper burr holder”
- Vacuum the upper burr holder.
From the manual: “Draw dust out from the upper burr holder”
- Vacuum the lower burr while it is still in place.
From the manual: “13 Draw dust out from”
- Unscrew the lower burr and take it out.
From the manual: “Unscrew and take out”
- Clear the remaining coffee from the grinding chamber, then refit the lower burr.
From the manual: “Put the lower burr back”
- Screw the upper burr back onto its holder.
From the manual: “Replace the upper burr on”
- Refit the upper burr holder in the grinder.
From the manual: “Put the upper burr holder back”
- Refit the top cover.
From the manual: “Replace the cover”
- Seat the hopper again and tighten its locking screw.
From the manual: “Tighten the lock screw (9) (see Fig. 3).”
Sources
- Eureka: How to clean & change burr of your Atom Specialty (pictorial guide) Maker’s support page
- Eureka Atom range user handbook (Atom 60 / Atom Specialty 65 / Atom Specialty 75) Manual
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.