ShotPulled › Gear › Burr clean
Clean the burrs and outlet chute: DF64 DF54
Before you start
- Tools
- dry brush, bellows (supplied), handheld vacuum (optional)
- Supplies
- None listed
Warnings
- Clean with a dry brush or a handheld vacuum only; never wash the grinder with water. Source: DF54 coffee grinder instructions (EN)
- Grounds left in the threads can jam the adjusting disc, and DF says that voids any warranty claim. Source: DF54 coffee grinder instructions (EN)
- Disconnect the power before removing or refitting parts. Source: DF54 coffee grinder instructions (EN)
- Take care handling the burrs while they are out. Source: DF54 coffee grinder instructions (EN)
Steps
- With the grinder running, fit the bellows on the upper burr holder and pump it to blow out leftover grounds.
From the manual: “andpr esst hebel l ow t obl ow outanyr esi dualcof f eegr i ndsi nsi det hegr i nder”
- Switch off and unplug the grinder.
From the manual: “4.Unpl ugt hegr i nderandt ur nt headj ust i ngdi scant i cl ockwi set ot akei tout”
- Turn the adjusting disc anticlockwise until it comes off.
From the manual: “t ur nt headj ust i ngdi scant i cl ockwi set ot akei tout”
- Lift out the upper burr holder.
From the manual: “t henr emovet heupperbur rhol der”
- Brush both burrs clean with a dry brush.
From the manual: “5.Cl eanbot hbur r swi t hadr ybr ush;”
- Brush out the outlet chute with a dry brush.
From the manual: “6.Cl eant heout l etchut ewi t hadr ybr ush;”
- Check the threads are free of grounds, then refit the upper burr holder and screw the adjusting disc back on.
From the manual: “7.Rei nst al lt heupperbur rhol derandputt headj ust i ngdi scon”
- Turn the adjusting disc clockwise until it stops.
From the manual: “adj ust i ngdi sccl ockwi seunt i li tcan' tmove”
- Back the disc off anticlockwise to 10 on the scale, then set your usual grind.
From the manual: “adj usti tcount er cl ockwi set o scal e1 0.”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.