ShotPulled › Gear › Built-in grinder burr clean
Remove and clean the upper burr (blockage): De'Longhi Specialista Maestro
Before you start
- Tools
- brush (not included), vacuum cleaner
- Supplies
- None listed
Steps
- Only if foreign matter blocks the burr: take off the bean container first.
From the manual: “You may also need to remove the burr if it becomes blocked with foreign matter.”
- Attach the portafilter and run the grinder without beans to clear the coffee guide.
From the manual: “Attach the portafilter (C1) and operate the mill without beans to free the coffee guide;”
- Switch the machine off.
From the manual: “Turn the appliance off;”
- Turn the grind selector anticlockwise as far as it goes, to REMOVE.
From the manual: “Turn the grinding selector anticlockwise as far as it will go to the “REMOVE” position”
- Lift the upper burr out by its handle.
From the manual: “Extract the upper burr, gripping it by the handle”
- Brush the burr and vacuum up the coffee residue.
From the manual: “Clean the burr with a brush (fig. 50) (not included) and remove the coffee residues using a vacuum cleaner”
- Put the upper burr back.
From the manual: “Put the upper burr back in place (fig. 51);”
- Tug the handle: a correctly seated burr does not move.
From the manual: “Make sure the burr is inserted correctly by pulling it by the handle.”
- Turn the selector to your grind level.
From the manual: “Turn the selector to select the desired grinding level (fig. 13);”
- Refit the bean container until it clicks.
From the manual: “Put the container back inserting it in the coffee mill.”
Sources
Researched on .
Published: the sentence is on the maker’s own page or in the maker’s own document.