ShotPulled
Gear Home

ShotPulled › Gear › Descale

Descale the machine: De'Longhi Specialista Prestigio

Before you start

Time
About 40 minutes
Tools
container of about 2 litres
Supplies
De'Longhi descaler (one 100 ml pack (to mark A), topped up with 1 litre of water (to mark B))

Warnings

The machine tells you when

This machine keeps count itself and tells you when this job is due, so follow the machine rather than a calendar.

What you see
descale light (B9) comes on
Shown as
A light
What it counts
Water, against the hardness it is set to
Depends on
water hardness setting (levels 1-3, from the supplied Total Hardness Test strip)

Source: De'Longhi EC935X (La Specialista Prestigio) coffee maker instructions for use, US (EN/FR/ES)

Steps

  1. Take any water softener out of the tank.

    From the manual: “(IF PRESENT, REMOVE THE WATER SOFTENER DEVICE).”

  2. Pour the descaler into the tank up to the A mark inside it, which equals one 100 ml pack.

    From the manual: “inside the tank (equal to one 100ml packet).”

  3. Add 1 litre of water up to the B mark and put the tank back.

    From the manual: “Add water (1 liter) up”

  4. Turn the mode selector dial to the descale position; the descale light blinks and the OK light turns orange.

    From the manual: “light begins to blink: and the OK light turns to orange.”

  5. With the portafilter off, put a container (2 litres) under the coffee outlet, hot water spout and steam wand.

    From the manual: “recipient under the coffee outlet, hot water spout and steam wand.”

  6. Press OK to start descaling.

    From the manual: “Press the OK (B5)”

  7. Let the programme run: descaler comes out of the wand and coffee outlet in bursts and pauses until the tank is empty.

    From the manual: “comes out of the steam wand and coffee outlet.”

  8. When delivery stops and the OK light turns white, the rinse is next.

    From the manual: “Delivery stops and the OK light turns to white.”

  9. Empty the container and put it back empty.

    From the manual: “to collect the descaler solution and replace it empty.”

  10. Take out the tank, pour away any descaler left, rinse it, fill with fresh water to MAX and refit it.

    From the manual: “Remove the water tank, empty any residues of descaler solution, rinse”

  11. Press OK to start the rinse.

    From the manual: “Press the OK button: rinsing starts.”

  12. Wait until delivery stops and the machine readies itself for use.

    From the manual: “When rinsing is complete, delivery stops and the appliance prepares to be used again.”

  13. Empty the container of rinse water.

    From the manual: “Empty the recipients used to collect the rinse water.”

  14. Take out and empty the drip tray, then refit it.

    From the manual: “Extract and empty the drip”

  15. Empty and rinse the tank, fill it with fresh water and refit it.

    From the manual: “Empty, rinse, then fill the”

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to