ShotPulled
Gear Home

ShotPulled › Gear › Water filter / softener replacement

Replace the water filter and reset its counter: Bezzera Duo MN and Bezzera Matrix

Before you start

Tools
None listed
Supplies
water filter or softener (not supplied with the machine and not named by Bezzera)

Warnings

The machine tells you when

This machine keeps count itself and tells you when this job is due, so follow the machine rather than a calendar.

What you see
'Replace water filter' message on the touch screen
Shown as
A message on the display
What it counts
Litres of water
Depends on
filter duration in litres set under Settings > 'filters' (0 turns the prompt off)
How it clears
reset the filter meter under Settings > 'filters' after fitting the new filter
Can be switched off
Yes

Source: Bezzera Matrix-Duo instruction manual, multilingual (retailer-hosted copy on cdn.shopify.com)

Steps

  1. Replace or regenerate the filter or softener as its own maker instructs; Bezzera does not supply one.

    From the manual: “Once the filter has been replaced, reset the meter (see section 6.7).”

  2. Open the drop-down menu on the touch screen.

    From the manual: “Open the drop-down menu.”

  3. Go into the settings screen, entering the password if one is active.

    From the manual: “Access the settings screen (enter the password if active).”

  4. Use the side arrows to move through the menu to 'filters'.

    From the manual: “Scroll through the menu with the side arrows until reaching the "filters" item.”

  5. Touch its icon and set how many litres the new filter lasts before regeneration or replacement.

    From the manual: “set the number of litres useful for regeneration or replacement of the filter or water softener”

Sources

Researched on .

Community: the maker’s text, hosted somewhere else, usually by a retailer.

Applies to