ShotPulled
Gear Home

ShotPulled › Gear › Cleaning tablets

Run grinder cleaning tablets: Baratza Vario W+

Before you start

Tools
grounds bin
Supplies
grinder cleaning tablets (amount per the tablet maker's instructions); coffee beans for purging (about 30 g, discarded)

Warnings

Steps

  1. Empty the hopper, then press START/STOP to run out any coffee left in the grinder.

    From the manual: “use the START/STOP (7) button to run the grinder to expel any coffee that remains in the grinder.”

  2. Set the grind setting to 10.

    From the manual: “Adjust the grind setting to 10”

  3. Pour the tablet maker's recommended amount of tablets into the empty hopper.

    From the manual: “place the recommended amount of the chosen cleaning tablets into the empty bean hopper.”

  4. Set the target weight to at least the weight of the tablets you loaded.

    From the manual: “Set the target grind weight equal to or greater than the weight of the grinder cleaning tablets.”

  5. Put the grounds bin in place, press START/STOP and grind every tablet into the bin.

    From the manual: “Insert the grounds bin, then press the START/STOP button. Grind all the tablets into the bin.”

  6. Grind about 30 g of coffee (or the tablet maker's amount) to clear tablet residue.

    From the manual: “we recommend grinding approximately 30g coffee”

  7. Throw away the ground tablets and coffee.

    From the manual: “Discard the ground tablets/coffee.”

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to