ShotPulled
Gear Home

ShotPulled › Gear › Backflush (detergent)

Clean the group with the blind filter and detergent: Ascaso Baby T Plus and Ascaso Baby T Zero

Before you start

Tools
supplied blind filter
Supplies
Ascaso cleaning product (ref. V.8401 or V.8402, dosed per the product)

Steps

  1. With the machine on, take the coffee filter out of the filter holder and fit the supplied blind filter.

    From the manual: “With the machine running, replace the coffee filter in the filter holder with the supplied blind filter.”

  2. Add Ascaso cleaning product V.8401 or V.8402 to the blind filter, dosed as the product instructions say.

    From the manual: “Use cleaning product ref. V.8401 or V.8402, following instructions specified on it.”

  3. Lock the filter holder in and run the group so the product dissolves and cleans the ducts, solenoid valve and shower.

    From the manual: “This process dissolves the dust contained in the blind filter, cleaning the ducts and the solenoid valve”

  4. Repeat the run as many times as needed, until clean water comes out of the group discharge. Repeat until clean water comes out of the group discharge

    From the manual: “until clean water appears through the discharge of the group”

  5. Take the filter holder off and run the group for 30 seconds to pass clean water through it.

    From the manual: “remove the filter holder and operate the group for 30 seconds, passing clean water”

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Applies to