ShotPulled
Gear Home

ShotPulled › Gear › Fellow Opus

Fellow Opus cleaning and settings: what the manual says

Fellow’s manual lists 5 maintenance jobs for the Opus. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Burr clean Every 3 months

“If the grinder is used daily, the burrs should be cleaned at least every three months using tablets (see Automatic Cleaning to the right) or with a stiff brush.”
Cleaning tablets Every 3 months

“If the grinder is used daily, the burrs should be cleaned at least every three months using tablets (see Automatic Cleaning to the right) or with a stiff brush.”
Quick clean Every 60 shots

“The anti-static technology will work best for about 60 grinding cycles before it needs to be cleaned.”
Grounds cup / catch clean No interval given

“To clean the catch, wipe gently with a soft, damp cloth.”
Hopper clean No interval given

“Wipe grinder exterior and load bin with a soft, damp cloth.”

The collar

Adjustment
Stepless
Finer is
Counter-clockwise, for outer front dial viewed from front; CCW for inner ring viewed down inside
How a setting reads
A number on the dial; lower is finer
What one step is worth
The maker publishes no figure

Step-by-step guides

What the manual does not say

3 jobs with nothing stated
  • Bearing / thread lubrication
  • Burr replacement
  • Seal / gasket replacement
Notes from the research
  • No burr life, lubrication or seal guidance.

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.