ShotPulled
Gear Home

ShotPulled › Gear › Fellow Ode Gen 2

Fellow Ode Gen 2 cleaning and settings: what the manual says

Fellow’s manual lists 5 maintenance jobs for the Ode Gen 2. Each is below with how often and the sentence it comes from.

What to do, and how often

Job How often The manual’s sentence
Burr clean Every 3 months

“If the grinder is used daily, the burrs should be cleaned at least every three months using tablets (see below for Automatic Cleaning) or with a stiff brush.”
Cleaning tablets Every 3 months

“If the grinder is used daily, the burrs should be cleaned at least every three months using tablets (see below for Automatic Cleaning) or with a stiff brush.”
Quick clean Every 60 shots

“We found during our testing that the grinder will run for about 60 cycles before it needs to be cleaned to operate at its best performance.”
Grounds cup / catch clean No interval given

“To wash the catch, wipe gently with a soft cloth and warm soapy water.”
Hopper clean No interval given

“Wipe grinder exterior and load bin with a soft, damp cloth.”

The collar

Adjustment
Stepped, with numbered positions
Finer is
Counter-clockwise, viewed square-on from the front dial
How a setting reads
A number on the dial, from 1 to 11; lower is finer
What one step is worth
The maker publishes no figure

Step-by-step guides

What the manual does not say

3 jobs with nothing stated
  • Bearing / thread lubrication
  • Burr replacement
  • Seal / gasket replacement
Notes from the research
  • No burr life, lubrication or seal guidance.
  • 'Any other servicing should be performed by an authorized service representative.'

Sources

Researched on .

Published: the sentence is on the maker’s own page or in the maker’s own document.

Community: the maker’s text, hosted somewhere else, usually by a retailer.